* SPACE FORCE CHANGES:

    v1.01b  2/22/23
    Fix issue with MIDI clock not setting ECHOVERB delay time properly
    
    v1.01a
    Ramp always resets after program load, ramp also clears if trigger mode is changed
    removed incorrect knob settings in config mode (knobs 12+13)
     
    v1.01
    DSP - now use global MREG / CREG / SFR to save space in flash
    DSP - improve input muting for Echoverb mode
    Enable support for ALExpander multi switch   
    added dual bank (1-16 or 17-32) 

    v1.0b 5/16/22
    DSP - swap attack and release controls for dynamic mode to match screen labels
    MIDI - disable MIDI thru over 1/4" if we're not using it, prevents echoes
    
    v1.0a 3/30/22
    DSP -  Fix issue with spring reverb fading out
    DSP - fix clicking on PING knob for spring reverb
    Clean up dynamic mode knob ranges
    
    v1.0 3/19/22
    added emergency reset (hold knob and TAP)
    tweaked presets
    DSP - tweak detune in PITCH
    DSP - tweak PLATE flange feedback
    DSP - change mix taper for dry signal in all modes except SWELL
    fix issue loading factory presets

     b04
     Added "CLR" option to clear the expression / ramp setup
     Tidy up sysex receive
     Add delay effect to HOLD / Infinite reverb, now called Echoverb
     Added hold options to PLATE, MOD.HALL, SHIMMER, LOFI, ECHOVERB
     Fixed tap tempo stuff for Echoverb mode
     Add "Freeze" label to display when hold is active
     Read FXCore serial number from DSP
     Added flange to Plate = FLERB
     Added exp hi and lo calibration display in setup
     Changed LED to turn off if no tap function
     Changed exp disp threshold to match display state, the LED was reverting before the display
     Added foot switch support to multijack
     DSP - added LOW control to Mod Hall
     DSP - moved trem to after reverb in Spring
     DSP - added delay tone control to Echoverb
     DSP - delay in Echoverb no longer mutes in hold state
     Replace ramp up wave with triangle
     Add factory presets + preset restore in setup 3/18/22